[aprssig] aprsd confusion

[Andrew Rich]

Mate if I have to run KISS to fix it I can

Here is the APRS config file - bummer

linux:/var/lib/aprsd # more INIT.TNC
# These TNC cmds will be executed each time you start aprsd.
# Modify the MYCALL and BTEXT lines with your data.
# Add/delete any other commands your TNC needs for configuration.
# The last command "K" puts the TNC in communication mode and must be
present.
# These sample commands are for a Kantronics KPC-3
# A ctrl-C is sent to the TNC from the server just before these commands are
issued.
# Note: The TNCs user interface must have already been set for 9600 baud.
#
#
INTFACE TERMINAL
ECHO OFF
MCOM OFF
MSTAMP OFF
PASSALL OFF
MRPT ON
XMITOK OFF
FILTER ON ****************
CD SOFTWARE
NEWMODE OFF
#MYCALL must match MyCall in aprsd.conf
MYCALL VK4TEC-10
#You may turn off BTEXT here and use the "tncbeacon" command in aprsd.conf
instead.
# BTEXT _0000.00NI00000.00W& APRS Linux Internet Server
BEACON EVERY 15
#Note: The "APRS" in the next line will be overwritten by APDxxx where xxx
is the version number.
#      So, it matters not what you put there.
UNPROTO APRS VIA WIDE,WIDE
HEADERLN OFF
DIGI OFF
HID OFF
PACLEN 0
SCREENL 0
Monitor ON
K
#
# end of file




-----------------------------------------
Andrew Rich
Amateur radio callsign VK4TEC
email: vk4tec at tech-software.net <mailto:vk4tec at tech-software.net>
web: http://www.tech-software.net
Brisbane AUSTRALIA



-----Original Message-----
From: AE5PL Lists [mailto:HamLists at ametx.com]
Sent: Sunday, 23 April 2006 11:55 PM
To: TAPR APRS Mailing List
Subject: RE: [aprssig] aprsd confusion


This is a known issue with aprsD.  Andrew, make sure that if you are
running the TNC in converse mode (not KISS), you do not have FILTER ON
set in the TNC initialization file.  It should be FILTER OFF for KPCs.
If this does not correct the problem then the problem is in the code.

73,

Pete Loveall AE5PL
mailto:pete at ae5pl.net

> -----Original Message-----
> From: Gerhard F5VAG
> Posted At: Sunday, April 23, 2006 7:50 AM
> Subject: RE: [aprssig] aprsd confusion
>
> You are gating corrupted Mic-E to the APRS-IS:
>
> > -----Original Message-----
> > From: Andrew Rich
> > Sent: Saturday, April 22, 2006 6:31 PM
> > To: TAPR APRS Mailing List
> > Subject: RE: [aprssig] aprsd confusion
> >
> > Andrew VK4TEC wrote...
> >
> > > I am trying to use aprsd as an RF to INET only system It
> is working
> > > well. The only thing is, it seems to let in "ALL"

_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig