[aprssig] KPC-3+ momentarily inop w/ AGW
Amateur Radio WB8NUT
duffy at wb8nut.com
Sat Aug 12 10:19:57 CDT 2006
I would have to say something is not set up correctly with AGWPE. I
would help if you could give us some information as to the settings in
AGWPE, what port the computer is using, etc. I have an KPC3+ and AGWPE,
so you could probably just duplicate my settings and just adjust for the
comm port the TNC is connected to.
john b. leonard, jr. wrote:
> I have a problem that I hope somebody can help me with.
> I have a KPC3+. When I start it with AGWPE and AGWTERM, it doesn't seem to
> react to packets, i.e., it doesn't receive/monitor them on AGWTERM. But
> when I shut down AGW and start Hyperterminal to talk to the TNC, it works
> great. Monitors packets like crazy. Then when I shut down Hyperterm and
> start up AGW, all of a sudden everything works fine.
> I've uninstalled/re-installled both AGW products and no change.
> Computer is a Dell Latitude C600 w/ WinXP Pro. This setup has worked ok
> previously, but just within the last week or so it started messing up.
> TNC is connected directly to the serial/comm port with a serial cable which
> has worked just fine for many years.
> When I shutdown/restart the computer, it fails again. No blinkity-blink of
> the lites in the AGWPE tray icon. But if I use Hyperterm, shut it down,
> start AGWPE and everything works fine. Tray icon lites work, packets
> monitored ok, etc.
> What's up?
> "If stupidity got us into this mess, then why can't it get us out?"
> - Will Rogers
> aprssig mailing list
> aprssig at lists.tapr.org
"One ought never to turn one's back on a threatened danger and try to run away from it. If you do that, you will double the danger. But if you meet it promptly and without flinching, you will reduce the danger by half. Never run away from anything. Never!" -- Winston Churchill
More information about the aprssig