Order Tray | Contact Us | Home | SIG Lists

[aprssig] RE: SUSE LINUX AX25

Andrew Rich vk4tec at tech-software.net
Fri Aug 25 22:57:40 UTC 2006


Ok here is what I did

1) Run YAST in SUSE and enable ax25 libraries
2) edit /etc/axports

# /etc/ax25/axports
#
# The format of this file is:
#
# name callsign speed paclen window description
#
1       VK4TEC          1200    255     2       144.675 MHz (1200  bps)    

3) linux:/usr/sbin # kissattach /dev/ttyS1 1 192.168.1.105

4) Gets me this in ifconfig from linux 

ax0       Link encap:AMPR AX.25  HWaddr OH2BNS-1
          inet addr:192.168.1.105  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING  MTU:255  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:10
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)                  

*** sorry i had the other persons callsign left over ***

now what ?

Route ?



-----------------------------------------
Andrew Rich
Amateur radio callsign VK4TEC
email: vk4tec at tech-software.net
web: http://www.tech-software.net
Brisbane AUSTRALIA 

  -----Original Message-----
  From: Andrew Rich [mailto:vk4tec at tech-software.net]
  Sent: Saturday, 26 August 2006 8:44 AM
  To: vk4tec at tech-software.net; TAPR List
  Cc: ozaprs
  Subject: SUSE LINUX AX25


  Ok I have made the dicision I need to use the kernel ax25

  I have suse linux and seem to have the ax25 installed.

  How do I configure it ? how do i start it ?

  I know there is some stuff on google but it is giving me a headache.

  I need a simple step by step to get me going.



  -----------------------------------------
  Andrew Rich
  Amateur radio callsign VK4TEC
  email: vk4tec at tech-software.net
  web: http://www.tech-software.net
  Brisbane AUSTRALIA 

    -----Original Message-----
    From: Andrew Rich [mailto:vk4tec at tech-software.net]
    Sent: Saturday, 26 August 2006 8:06 AM
    To: TAPR List
    Cc: ozaprs
    Subject: JNOS Interface question


    Gudday

    I have JNOS ruinning and can do some basic tcpip over radio stuff.

    When i look at ifconfig in linux, i do not see the vhf interface.

    Is it only available in JNOS ?

    Perhaps I need to do ax25 support in LINUX instead ?


    -----------------------------------------
    Andrew Rich
    Amateur radio callsign VK4TEC
    email: vk4tec at tech-software.net
    web: http://www.tech-software.net
    Brisbane AUSTRALIA 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tapr.org/pipermail/aprssig/attachments/20060826/09de2aa6/attachment.htm 


More information about the aprssig mailing list