[aprssig] D700 in cold weather?

[Richard L. Beggs]

Go the partstore at:
http://www.partstore.com/ProductDetail.aspx?ProductSKU=3208274&ProductType=P
ART&ModelID=255859
Order a new fan and get rid of the noise and the worry. Works at a Mile
High!

***************************************************
Richard                               K0AEM  145.430
***************************************************

-----Original Message-----
From: aprssig-bounces at lists.tapr.org
[mailto:aprssig-bounces at lists.tapr.org]On Behalf Of Rich Mazzeo
Sent: Monday, December 25, 2006 3:39 AM
To: TAPR APRS Mailing List
Subject: Re: [aprssig] D700 in cold weather?

    I agree.  My D700 fan got noisy about 2 months prior to seizing
altogether. It has been seized for well over a year and a half with no ill
effets at room temp. The fan starts up only after being keyed no matter what
the temp is, same as in the TM-V7a.

--
Rich
N3XKU


----- Original Message -----
From: "Gary" <n6lrv at cox.net>
To: "TAPR APRS Mailing List" <aprssig at lists.tapr.org>; "Joel Maslak"
<jmaslak-aprs at antelope.net>
Sent: Sunday, December 24, 2006 11:24 PM
Subject: Re: [aprssig] D700 in cold weather?


> Hmmm... according to my info from Kenwood there is no temperature control
> system in the D700 instead (and like many kenwood mobiles) the fan is
> designed to turn on when the radio is keyed and turn off after a
> predetermined time has passed (probably a FET or 555 timer or similar
> controlling this). A better idea would have been to position the fan to
> actually cool what gets hot instead of blowing into a flat surface but
> then Kenwood has done that with many radios. Unless your radio's fan
> actually says 'ball bearings' on it then it probably has bushings and
> they get noisy pretty quick. I haven't seen a Kenwood mobile yet come
> equipped with a fan that has ball bearings but I haven't seen everything
> yet.
> 73,
> Gary
>
> Joel Maslak wrote:
>
>> Does anyone have D700 in cold weather experiences?
>>
>> Is it normal for the fan to run in extreme cold (it seems to not run
>> very much, or at least not loud enough for me to hear, when warm).
>> My current theory is that the temperature control system thinks a
>> "too cold" measurement means "sensor failed" or some such and turns
>> up the fan all the way.  It's certainly not transmitting enough to
>> get warm.
>>
>> The other possibility is that I have bearings going out in the fan,
>> and that's why it's a bit louder.  So I'm curious about people's
>> experience with it in cold weather.  I'm getting really tempted to
>> disconnect the fan, as it's not good for it to run in the extreme
>> cold either way (my usual rule for electronics that go in the car is
>> "no moving parts" because of the temperature extremes - obviously the
>> D700 fails that test, and I broke my rule - that'll teach me!  A big
>> heat sink would have been a much better idea, like even the cheap
>> Alincos do).
>>
>> (for reference, "cold" is -5F and colder)
>>
>> _______________________________________________
>> aprssig mailing list
>> aprssig at lists.tapr.org
>> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
>


_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig

--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database: 268.15.26/601 - Release Date: 12/24/2006
11:31 AM

--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database: 268.15.26/601 - Release Date: 12/24/2006
11:31 AM