Order Tray | Contact Us | Home | SIG Lists

[aprssig] AEA PK12 and UIView

Roger Grady k9opo-1 at sbcglobal.net
Thu Dec 28 14:11:43 UTC 2006

At 01:12 AM 12/28/2006, Daron J. Wilson wrote:

>I picked up a PK-12 TNC and it seemed fine on packet, so I hoped to use it 
>for my UIView APRS Igate.  I ve tried a couple of the UIView config files, 
>looks like there are a couple commands not recognized that I have to 
>adjust, but the biggest problem is what I get out of the TNC.  Here is a 
>screen capture from a straight terminal program.  It appears to display 
>the correct path information when I hear the station directly, but when it 
>is digipeated, I get a string of digipeater callsigns in there.

This is standard TNC-2 compatible behavior,  and also for the PK-12. It's 
controlled by the MRpt command, which defaults to ON. Setting it to OFF 
will display only the originating and destination stations.

Roger Grady  K9OPO

More information about the aprssig mailing list