[aprssig] AEA PK12 and UIView
Jan T. Pharo
la2bba at jpharo.net
Thu Dec 28 08:23:40 CST 2006
Roger Grady <k9opo-1 at sbcglobal.net>, Thu, 28 Dec 2006 09:11:43 -0500:
>At 01:12 AM 12/28/2006, Daron J. Wilson wrote:
>>I picked up a PK-12 TNC and it seemed fine on packet, so I hoped to use it
>>for my UIView APRS Igate. I ve tried a couple of the UIView config files,
>>looks like there are a couple commands not recognized that I have to
>>adjust, but the biggest problem is what I get out of the TNC. Here is a
>>screen capture from a straight terminal program. It appears to display
>>the correct path information when I hear the station directly, but when it
>>is digipeated, I get a string of digipeater callsigns in there.
>This is standard TNC-2 compatible behavior, and also for the PK-12. It's
>controlled by the MRpt command, which defaults to ON. Setting it to OFF
>will display only the originating and destination stations.
Also, if PK12 will accept the Host mode KISS command from UI-View, you
don't need to care what the TNC can do; UI-View will control it.
73 de Jan, LA2BBA
More information about the aprssig