[aprssig] KPC3+

[Matt Werner]

http://www.kantronics.com/documents/kpc3ppinout.pdf

Page 2, pin 13.

EXT-IN can be jumpered to supply power to the TNC.  Power can go both
ways however, so shorting this pin, if jumpered correctly, will short
the walwart (if that's what you're using).

See J7 on the top of that page.

73 - Matt
KB0KQA

On 2/4/06, K2DLB <k2dlb at stny.rr.com> wrote:
> Matt
>     I don't find anything in the jumper listings for +12v output to computer
>
> Brian
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
>
>