[aprssig] KPC3+

[Jim]

easy test. unplug walwart & see if tnc is powered with computer
----- Original Message ----- 
From: "Matt Werner" <kb0kqa at gmail.com>
To: "TAPR APRS Mailing List" <aprssig at lists.tapr.org>
Sent: Saturday, February 04, 2006 9:50 AM
Subject: Re: [aprssig] KPC3+


> http://www.kantronics.com/documents/kpc3ppinout.pdf
>
> Page 2, pin 13.
>
> EXT-IN can be jumpered to supply power to the TNC.  Power can go both
> ways however, so shorting this pin, if jumpered correctly, will short
> the walwart (if that's what you're using).
>
> See J7 on the top of that page.
>
> 73 - Matt
> KB0KQA
>
> On 2/4/06, K2DLB <k2dlb at stny.rr.com> wrote:
>> Matt
>>     I don't find anything in the jumper listings for +12v output to 
>> computer
>>
>> Brian
>> _______________________________________________
>> aprssig mailing list
>> aprssig at lists.tapr.org
>> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>>
>>
>>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.375 / Virus Database: 267.15.1/250 - Release Date: 2/3/2006
>
>