[aprssig] Wanted: tone-based reset module schematics
Andy AB9FX ab9fx at aprs.plTue Feb 7 03:22:40 UTC 2006
- Previous message: [aprssig] Wanted: tone-based reset module schematics
- Next message: [aprssig] Wanted: tone-based reset module schematics
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
There is some project with DTMF control (reset TNC and more) working with SP6VGA-2 digi by SQ6ADE. http://www.aprs.pl/ftp/dtmfd.zip Comments are in Polish, so if you are interested in it, I can do translation for you. 73! Andy AB9FX SP3LYR ----- Original Message ----- From: Brad [VE3BSM] To: 'TAPR APRS Mailing List' Sent: Monday, February 06, 2006 18:56 Subject: [aprssig] Wanted: tone-based reset module schematics One of the digipeaters I upgraded to UIDIGI last summer had a small circuit card mounted in the TNC. I didn't pay much attention at the time, but it turns out to be a small reset circuit for the TNC. Basically, it listens on the audio input for a specific tone for 2 seconds, at which point it trips the reset line of the TNC. It's used to recover from a severe lockup of the TNC (which it turns out UIDIGI sometimes suffers from). I had to use it once recently and it saved me from a miserable hike up a snow-covered mountain. I'd like to come up with something similar for the other digis I maintain. But I haven't yet found any schematics for anything *simple* that does the trick. I'm hoping maybe somebody here has some schematics, or a pointer to a site with some. Failing that, when Spring comes I'll hike up the mountain and reverse-engineer what's up there, though that's not exactly my strong suit. Emphasis on the "simple". This one uses a single tone and I seem to recall it had one IC (maybe two) and only a couple of discreet components. A DTMF decoder would do the trick (and be less prone to spurious resets, presumably), but I really don't have the ability to get into PIC-based designs. Anybody seen anything like this? Brad. VE3BSM ------------------------------------------------------------------------------ _______________________________________________ aprssig mailing list aprssig at lists.tapr.org https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.tapr.org/pipermail/aprssig/attachments/20060206/1de81cf7/attachment.htm
- Previous message: [aprssig] Wanted: tone-based reset module schematics
- Next message: [aprssig] Wanted: tone-based reset module schematics
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the aprssig mailing list
