[aprssig] KPC as a fill in
Robert Bruninga bruninga at usna.eduTue Feb 14 18:18:10 UTC 2006
- Previous message: [aprssig] APRS for a motorcycle - radios?
- Next message: [aprssig] UIDIG ID packet?
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Andy, I was going to suggest that as well, but then I think I remember this was for a special event, and so in that case, there would be other W1-1 temporary digis, and I think they might want them to see each other... So use a path of VIA WIDE2-1 if this is a permanent fill-in digi. Use a path via WIDE1-1 if it is a temporary fill-in amongst other temporary WIDE1-1's too. Bob >>> "Andy AB9FX" <ab9fx at aprs.pl> 02/14/06 12:01 AM >>> I would add one more command for new 9.1 version: UIDUPE 30 If anyone purchased new TNC or upgraded. And I would change own path (this is not mobile) LTP 1 APN382 VIA WIDE1-1 to LTP 1 APN382 VIA WIDE2-1 (APN... according to firmware version) 73! Andy ----- Original Message ----- From: "Cap Pennell" <cap at cruzio.com> To: "TAPR APRS Mailing List" <aprssig at lists.tapr.org> Sent: Monday, February 13, 2006 22:32 Subject: RE: [aprssig] KPC as a fill in > That "named digi" capability comes from the TNC's MYCALL already. > > Also: > > INTface TERMINAL > CD SOFTWARE > CWID EVERY 0 > DIGIpeat ON > HID OFF > PASSAll OFF > TXDelay 30 > Unproto APN383 > UIdigi ON WIDE1-1 > UIFlood % (disabled) > UITrace % (disabled) > > There's good info at http://nwaprs.info/fill-in.htm > > > 73, Cap > >> -----Original Message----- >> From: aprssig-bounces at lists.tapr.org >> [mailto:aprssig-bounces at lists.tapr.org]On Behalf Of Bill Vodall WA7NWP >> Sent: Monday, February 13, 2006 20:07 PM >> To: TAPR APRS Mailing List >> Subject: Re: [aprssig] KPC as a fill in >> >> >> >> >> Cap Pennell wrote: >> > Bill, in answer to your two questions below, >> >> Thanks Cap, great stuff as usual and preserverd in the nwaprs wiki. >> >> One tweak: >> >> > Kantronics TNC "Fill-In" or Event DIGI >> > MYAlias % (disabled, not RELAY nor WIDE nor TRACE) >> >> Wouldn't we want the myalias to be <callsign> in case somebody wanted to >> specifically use that digi? Or is that picked up from MYCALL? >> >> Bill > > > _______________________________________________ > aprssig mailing list > aprssig at lists.tapr.org > https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig _______________________________________________ aprssig mailing list aprssig at lists.tapr.org https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
- Previous message: [aprssig] APRS for a motorcycle - radios?
- Next message: [aprssig] UIDIG ID packet?
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the aprssig mailing list
