[aprssig] Problem with Peet Brothers and KPC3+

[Daron J. Wilson]

The Peet could have reset and you are in the wrong output mode for serial
data.  Of course, it could be most anything, but that is a likely chance.
I've not seen it do that, we have 6 of them on hilltops, but it sure is
possible.

Good luck.

73 N7HQR



> -----Original Message-----
> From: aprssig-bounces at lists.tapr.org [mailto:aprssig-
> bounces at lists.tapr.org] On Behalf Of Michael J. Wolthuis
> Sent: Saturday, February 18, 2006 2:46 PM
> To: 'TAPR APRS Mailing List'
> Subject: [aprssig] Problem with Peet Brothers and KPC3+
> 
> I have a really weird problem going on and looking for assistance.  We
> recently reloaded the K7D3 (KC8LCP) weather station in Michigan.  The TNC
> and Peet Brothers 2k were both fully reset and reconfiged.  We got quality
> data for about 2hrs looking at findu.com and now the weather packet has
> not
> changed in the TNC at all.  It is stuck at the same setting.  Anyone know
> why this would be?  Could it be the Peet is reverting out of $ULTW and
> back
> to !! or something?
> 
> Mike
> Kb8zgl
> 
> 
> 
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig