[aprssig] W1-1 vs WIDE1-1
HamLists at ametx.com
Sun Feb 26 12:26:38 CST 2006
The Kenwood radios allow you to enter W instead of WIDE and R instead of
RELAY in the path as a shorthand method of path entry. The radios would
then expand W1 to WIDE1-1 for transmission. There may be other software
or hardware that do something similar, but this is the one I know of.
Note also that the shorthand is inclusive of the SSID (W2 = WIDE2-2).
Don't know what they would do with W1-1,W2-2. As a further example for
those that use the Kenwoods (including myself), to get WIDE1-1,WIDE2-2
in the path, you can enter W1,W2 for your path. However, to get WIDE2-1
you must enter WIDE2-1 I think.
Hope this helps.
Pete Loveall AE5PL
mailto:pete at ae5pl.net
> -----Original Message-----
> From: Robbie - WA9INF
> Posted At: Sunday, February 26, 2006 12:09 PM
> Subject: [aprssig] W1-1 vs WIDE1-1
> What firmware, or software was there that recognized W1-1 as
> well as WIDE1-1? I seem to remember that it was excepted at
> one time to use W instead WIDE.
More information about the aprssig