[aprssig] W1-1 vs WIDE1-1
Robbie - WA9INF
mwrobertson at comcast.net
Sun Feb 26 12:34:19 CST 2006
It appears then, the user in this case has something set up wrong, as
the radio is not expanding the W1-1 to a WIDE1-1. I forgot, I have both
the TMD-700 and THD-7a, should have looked there also!
AE5PL Lists wrote:
> The Kenwood radios allow you to enter W instead of WIDE and R instead of
> RELAY in the path as a shorthand method of path entry. The radios would
> then expand W1 to WIDE1-1 for transmission. There may be other software
> or hardware that do something similar, but this is the one I know of.
> Note also that the shorthand is inclusive of the SSID (W2 = WIDE2-2).
> Don't know what they would do with W1-1,W2-2. As a further example for
> those that use the Kenwoods (including myself), to get WIDE1-1,WIDE2-2
> in the path, you can enter W1,W2 for your path. However, to get WIDE2-1
> you must enter WIDE2-1 I think.
> Hope this helps.
> Pete Loveall AE5PL
> mailto:pete at ae5pl.net
>>From: Robbie - WA9INF
>>Posted At: Sunday, February 26, 2006 12:09 PM
>>Subject: [aprssig] W1-1 vs WIDE1-1
>>What firmware, or software was there that recognized W1-1 as
>>well as WIDE1-1? I seem to remember that it was excepted at
>>one time to use W instead WIDE.
More information about the aprssig