[aprssig] KPC3 8.2 ROM

[Edwards, Chris]

We setup another fill-in digi in Warner Robins, GA just south of Macon this
weekend. 

Ae4xo



-----Original Message-----
From: aprssig-bounces at lists.tapr.org
[mailto:aprssig-bounces at lists.tapr.org]On Behalf Of Robert Bruninga
Sent: Monday, February 27, 2006 9:25 AM
To: aprssig at lists.tapr.org; brianbr at mac.com
Subject: Re: [aprssig] KPC3 8.2 ROM


A fill-in digi that only responds to WIDE1-1 can
use any TNC.  SO the old KPC-3 is just fine
for that.  Just set 

MYALIAS    WIDE1-1. 
BText  !DDMM.hhN1DDDMM.hhW#PHGxxxx W1,  comments...
B EVERY 60
UNPROTO APN360

Done.

Notice the "1" after the North.
Notice the W1 as the first part of the position comment
Notice the PHG is required for digis
Notice the PATH is DIRECT only!
Notice the UNPROTO TOCALL is APN360 showing it
           is a KPC-3 with 6.0 ROM
Bob, WB4APR

>>> brianbr at mac.com 02/27/06 12:45 AM >>>
  Me too ... a local ham in a great position to put a fill-in digi in  
one of or APRS black holes here in VT has a KPC-3 with a 6 ROM in it  
and we could use an 8.2 ROM here as well.



cheers ... 73 de brian  riley,  n1bq , underhill center, vermont
   <n1bq at wulfden.org>



On Feb 26, 2006, at 11:41 PM, David Holm wrote:

> I am looking for a KPC3 8.2 ROM chip. I have a KPC3 with a 6.0 ROM  
> in it. I
> am currently using it in KISS mode but would like to have the  
> option of
> using it in standalone mode also. Thank you for any assistance. E- 
> mail is
> n7drh at direcway.com 

_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org 
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig


_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig