Order Tray | Contact Us | Home | SIG Lists

[aprssig] KPC3 8.2 ROM

Brian Riley brianbr at mac.com
Mon Feb 27 16:30:20 UTC 2006


well I was a little hasty in calling it a fill-in digi, it will be  
more than a fill-in and less the a wide area full service. It will  
have to do all things for a well defined black hole with good  
coverage to the north to Canada, but nothing to the south for 20-30  
miles because of  the green Mountains. It needs to do WIDEN-N

     cheers ... 73 de brian riley, underhill center, vermont
     brianbr at wulfden.org



On Feb 27, 2006, at 9:25 AM, Robert Bruninga wrote:

> A fill-in digi that only responds to WIDE1-1 can
> use any TNC.  SO the old KPC-3 is just fine
> for that.  Just set
>
> MYALIAS    WIDE1-1.
> BText  !DDMM.hhN1DDDMM.hhW#PHGxxxx W1,  comments...
> B EVERY 60
> UNPROTO APN360
>
> Done.
>
> Notice the "1" after the North.
> Notice the W1 as the first part of the position comment
> Notice the PHG is required for digis
> Notice the PATH is DIRECT only!
> Notice the UNPROTO TOCALL is APN360 showing it
>            is a KPC-3 with 6.0 ROM
> Bob, WB4APR
>
>>>> brianbr at mac.com 02/27/06 12:45 AM >>>
>   Me too ... a local ham in a great position to put a fill-in digi in
> one of or APRS black holes here in VT has a KPC-3 with a 6 ROM in it
> and we could use an 8.2 ROM here as well.
>
>
>
> cheers ... 73 de brian  riley,  n1bq , underhill center, vermont
>    <n1bq at wulfden.org>
>
>
>
> On Feb 26, 2006, at 11:41 PM, David Holm wrote:
>
>> I am looking for a KPC3 8.2 ROM chip. I have a KPC3 with a 6.0 ROM
>> in it. I
>> am currently using it in KISS mode but would like to have the
>> option of
>> using it in standalone mode also. Thank you for any assistance. E-
>> mail is
>> n7drh at direcway.com
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>





More information about the aprssig mailing list