Order Tray | Contact Us | Home | SIG Lists

[aprssig] Digipeater routing: 'Get me to findu'

Robert Bruninga bruninga at usna.edu
Tue Feb 28 16:33:59 UTC 2006


>>> HamLists at ametx.com 02/28/06 11:20 AM >>>
>This requires... the IGate software must support 
>the heard query.

Hummh... the ?APRSH query was in the fundamental 
definition of APRS.  I hope all major software 
included it.  Users need to have expectations that
the APRS system will respond as it was designed to.

>Personally... I don't like the... requirement that 
>IGates maintain heard statistics for all stations 
>for eight hours.  

It would amaze me if any APRS software did not
keep heard statistics for each station for at least
24 hours.  Knowing the  availability of surrounding
local APRS stations is critical in any local event or
network...   24 hours seems to match the human
schedule  pretty well...   ***Especially on HF where
propogation is diurnal...       de WB4APR, Bob

> -----Original Message-----
> From: Robert Bruninga
> Posted At: Tuesday, February 28, 2006 10:10 AM
> Subject: Re: [aprssig] Digipeater routing: 'Get me to findu'
> 
> Yes, use the HEARD QUERY.
> Look on your D700 for the IGate
> Then send it a QUERY for your callsign.
> It should send you back a one-line list of how many times you 
> were heard per hour in the last few hours.  Response should 
> be something like 
> 
> "Heard: 15  12  6   0   0    0"
> 
> For the last 6 hours.

_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org 
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig





More information about the aprssig mailing list