[aprssig] Re: TNC Sleeping -- KISS OFF Utility

[Andrew Rich]

Fred,

You are using UI-VIEW right, so toggle in your coms setup to "KISS" and then
"NONE"

That will HOPEFULLY drop you back out of KISS , on the second action

All this stuffing around with KISS OFF utilities is driving me nuts


-----------------------------------------
Andrew Rich - VK4TEC
vk4tec at tech-software.net <mailto:vk4tec at tech-software.net>
www.tech-software.net
Brisbane AUSTRALIA



-----Original Message-----
From: aprssig-bounces at lists.tapr.org
[mailto:aprssig-bounces at lists.tapr.org]On Behalf Of Robbie - WA9INF
Sent: Wednesday, 4 January 2006 12:21 AM
To: TAPR APRS Mailing List
Subject: Re: [aprssig] Re: TNC Sleeping -- KISS OFF Utility


Fred,

I may have missed it, but has anyone mentioned that the MFJ's has an
"Autobaud" command. If it is on, then every time the tnc is turned off
you must hit several characters immediately upon turning it back on to
allow baud rate re-sync with the computer.

Once that is done and working again, set AutoBaud to OFF to prevent
having to do this again, unless the battery runs down...

Robbie

Fred Atkinson, WB4AEJ wrote:

>     I tried that using Hyperterminal.  No reaction.
>
>
>                                                                     Fred,
> WB4AEJ
>
> ----- Original Message -----
> From: <scott at opentrac.org>
> To: "'TAPR APRS Mailing List'" <aprssig at lists.tapr.org>
> Sent: Monday, January 02, 2006 10:56 PM
> Subject: RE: [aprssig] Re: TNC Sleeping -- KISS OFF Utility
>
>
>
>>We're just talking about sending 3 bytes, right?  Your terminal program
>>might let you do that (in Windows anyway) from the keyboard.  Using the
>>numeric keypad:
>>
>>ALT 192, ALT 255, ALT 192
>>
>>Holding down ALT and typing a 3-digit number produces the ASCII character
>>that corresponds to that number.  Or you can just send a 3-byte file with
>>those bytes....
>>
>>Scott
>>N1VG
>>
>>
>>>-----Original Message-----
>>>From: aprssig-bounces at lists.tapr.org
>>>[mailto:aprssig-bounces at lists.tapr.org] On Behalf Of Mark Rennebaum
>>>Sent: Monday, January 02, 2006 7:44 PM
>>>To: aprssig at lists.tapr.org
>>>Subject: [aprssig] Re: TNC Sleeping -- KISS OFF Utility
>>>
>>>
>>>"Stephen H. Smith" <wa8lmf2 at aol.com> wrote:
>>>
>>>
>>>>If there is a demand I could make this into a Vb program
>>>
>>>which I would then
>>>
>>>>release the source as above.
>>>
>>>I've done this exact program (VB 6.0) for MARCA a couple of
>>>weeks ago, and I
>>>can make the source (or executable) available to anyone who
>>>wishes it. Uses
>>>a simple GUI, can choose the port and other parameters, etc.
>>>Pretty basic.
>>>
>>>Wrote a similar program for the Kantronics host mode (C0 Q
>>>C0) as well.
>>>
>>>- Mark   KC7KMP
>>>kc7kmp at hotmail.com
>>>
>>>
>>>
>>>_______________________________________________
>>>aprssig mailing list
>>>aprssig at lists.tapr.org
>>>https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>>>
>>>
>>
>>
>>
>>
>>_______________________________________________
>>aprssig mailing list
>>aprssig at lists.tapr.org
>>https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
>



_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig