[aprssig] kpc-3 and usb
timelord64 at gmail.com
Tue Jan 10 07:31:47 CST 2006
I have used a Radio Shack USB to serial interface for a while now,
between my Compaq laptop and my KPC3. I also use UIVIEW as well as
WINPACK, the PSK31 program DIGIPAN (through a RIGblaster interface),
and the software to program my Icom R10 scanner.
The only minor problem I have is that it is an older version that is
not rated for Windows XP. If I disconnect the cable from the laptop,
it "forgets" where the software is at. I have to go back in and reset
everything to get it to work. I really need to see if there is a
driver update available!!
When I first installed it, the adapter wanted to work on COM5, and
UIVIEW only likes COM1-3. I went into the device manager and reset it
to work on COM1.
Darrell Lingenfield 3rd
==>On 1/9/06, Edwards, Chris <cedwards at trane.com> wrote:
> anyone have any success at getting a usb/serial adapter to work with a
> kpc-3? I had it working in hyperterminal but once I started aprs+sa it
> Chris Edwards
> aprssig mailing list
> aprssig at lists.tapr.org
More information about the aprssig