[aprssig] KPC 3+ and Peet Bros 100 interfacing

[Chuck Kimball]

Anyone have any suggestions or have one of those  Ah-Ha moments they 
care to share.

I've been trying to get an Ultimeter 100 station I got earlier this week 
interfaced to a KPC3+ for a digi site, and seem to be chasing my tail.

I've tried both the serial input, and the GPS input on the DB9.   I can 
see the data from the Ultimeter on my PC.   I can get data from my GPS 
into the KPC 3+. 
But I can't get the WX data to show up in the LT.   Anyone fought this 
battle before me? 

Thanks in Advance

Chuck   n0nhj
Glenwood Springs, CO
 

My test file:
INT TERM
HID OFF
CD SOFTWARE
MYCALL ATEST   
RTEXT 12345678
UNPROTO APN391 VIA WIDE2-1
ABAUD 2400
GPSHEAD 1 $ULTW
LT 2 !3920.07NS10757.44W#PHG2800 W2,COn /A=008926 N0NHJ
LT 3 !3920.07NS10757.44W#PHG2800 W2,COn /A=008926 N0NHJ
BLT 1 EVERY 00:10:00 START 00:00:47
BLT 2 EVERY 00:20:00 START 00:00:07
BLT 3 EVERY 00:20:00 START 00:10:07
LTP 1 APN391 VIA WIDE2-1
LTP 2 APN391
LTP 3 APN391 VIA WIDE2-1
;
UIDIGI ON WIDE3-3,WIDE4-4,WIDE5-5,WIDE7-7
UIDUPE 28
UIFLOOD  CO,28,ID
UITRACE WIDE,28
;
RANGE 0.0:27.6/0.0:27.6/0.0:27.6/0.0:27.6/0.0:27.7
TELEMTRY 90
;
; DAYTIME  yymmddhhmmss
;
MYREMOTE ATEST-9
; INT GPS