[aprssig] APRS & IRLP / Echolink

[Richard Hoskin]

Keith,

I was thinking along the lines that there might be Application/Script that
would supply all the IRLP node posits to APRS-IS from the data already
available at the IRLP web site. This could be an Application.

The IGate could run the Application and send to RF the local IRLP nodes or
better still the Applications would be smart enough to send to an APRS
Mobile all IRLP/Echolink nodes within 100Km radius when requested to do so
by the APRS Mobile.

Cheers
Richard
VK3JFK


> -----Original Message-----
> From: aprssig-bounces at lists.tapr.org [mailto:aprssig-
> bounces at lists.tapr.org] On Behalf Of VE7GDH
> Sent: Saturday, 10 June 2006 6:06 PM
> To: aprssig at lists.tapr.org
> Subject: Re: [aprssig] APRS & IRLP / Echolink
> 
> Richard VK3JFK wrote...
> 
> > Is there any APRS application that will interface with IRLP / Echolink
> so
> > that I can see where the Nodes are on my map? Or better still transmit
> > the local node information on to RF so it is displayed on my D700 when
> > I'm passing thought a town?
> 
> Dunno about EchoLink but for IRLP, take a look at the "files" area...
> http://groups.yahoo.com/group/irlp/files/ It sends data by TCPIP to the
> APRS-IS. You could arrange for the local IGate to gate it back out to RF.
> See <http://www.findu.com/cgi-bin/find.cgi?call=irlp*>
> 
> I understand there is a glitch in the script, but I haven't observed the
> problem. I believe there is an update coming out for it soon.
> 
> Keith VE7GDH
> Node 1147
> 
> 
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig