[aprssig] APRS & IRLP / Echolink

Richard Hoskin vk3jfk at amsat.org
Wed Jun 14 03:17:41 CDT 2006


I believe Echolink requires you to have a TNC dedicated to the APRS task. It
will also use UI-View32 in TNC mode but will not in Host mode or APRS-IS

The version of Echolink I've been running will has no facility to allow
direct APRS-IS connections. This is a bit old fashioned especially when
Echolink is internet based.

If you find out that there is a way to do it let me know.


> -----Original Message-----
> From: aprssig-bounces at lists.tapr.org [mailto:aprssig-
> bounces at lists.tapr.org] On Behalf Of Dave Baxter
> Sent: Monday, 12 June 2006 7:14 PM
> To: aprssig at lists.tapr.org
> Subject: Re: [aprssig] APRS & IRLP / Echolink
> Echolink has that facility built in.
> It can post directly to the IS, or (I think) via another radio/TNC to
> RF.
> But, that then of course knocks out the voice receiver (unless suitable
> filters etc) if on the same band.
> I've never run it as a link or repeater, but I know someone who has, so
> will ask if needed.  Or you could go to the appropriate websites and ask
> their?
> Dave G0WBX
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig

More information about the aprssig mailing list