[aprssig] Cisco rollover to RS-232
John Gleichweit smokeybehr at sbcglobal.netSat Mar 4 03:43:13 UTC 2006
- Previous message: [aprssig] Cisco rollover to RS-232
- Next message: [aprssig] Cisco rollover to RS-232
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Do a search on cisco and "console cable" to get the right pinouts. -- John "Smokey Behr" Gleichweit FF1/EMT, CCNA, MCSE IPN-CAL023 N6FOG UP Fresno Sub MP183.5 ECV1852 List Owner x6, Moderator x4 CA-OES 51-507 -----Original Message----- From: aprssig-bounces at lists.tapr.org [mailto:aprssig-bounces at lists.tapr.org]On Behalf Of Derek Koonce Sent: Friday, March 03, 2006 5:50 PM To: TAPR APRS Mailing List Subject: Re: [aprssig] Cisco rollover to RS-232 I did a quick search using the terms [ "serial port" RJ45 "pin out" ] on Google. Try this for a description: http://www.arcelect.com/rs232.htm Drawback is that it may not be a standard. I went back to search a bit more using ["serial port" RJ45 "pin out" cisco] and found this http://www.cisco.com/en/US/products/hw/video/ps1870/products_administration_ guide_chapter09186a008007d503.html and http://www.technick.net/public/code/cp_dpage.php?aiocp_dp=pincabser_cisco_9 These show different pinouts than the previous link. I would keep searching til you have a better feeling of the results. Final task would probably be pick one pinout and test until you find a match. You can also watch pins from the RJ45 unit and watch for data being transmitted using an AC volt meter. Be sure to identify the ground pin before starting. This could give you a starting point. Derek Koonce KE6JTP Fred Atkinson, WB4AEJ wrote: > I am getting an RJ45 to DB-25 adapter. I have to set the pins to the >correct pinout myself. > > What I want is a way to turn the pins on the rollover cable into a DB-25 >RS-232 so I can talk to the TNC-2. > > Does anyone know the correct pinout for that? > > 73, > > > > Fred, >WB4AEJ > > >_______________________________________________ >aprssig mailing list >aprssig at lists.tapr.org >https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig > > > > _______________________________________________ aprssig mailing list aprssig at lists.tapr.org https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.375 / Virus Database: 268.1.1/272 - Release Date: 3/1/2006 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.375 / Virus Database: 268.1.1/272 - Release Date: 3/1/2006
- Previous message: [aprssig] Cisco rollover to RS-232
- Next message: [aprssig] Cisco rollover to RS-232
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the aprssig mailing list
