[aprssig] N3HGB-1 DIGI questions

[Amateur Radio WB8NUT]

I use AGWDigi (Free) with AGWPE (Free) and AGWTracker (you can use it or 
help with development by registering it).  AGWTracker is being enhanced, 
uses UI-View Maps as is, can be used with MapPoint, has Internet Mapping 
built in, and he is working on an interfacing capability that will allow 
it to use all the existing UI-View Third Party modules that have been 
developed.  AGWDigi and AGWTracker both support all the new WIDEn-N specs.

Duffy
www.wb8nut.com

Joe Della Barba wrote:
>
> I got a hold of a Kenwood TR2600A H/T to make into a digi at my house 
> (N3HGB-1).
> 4 questions:
> 1 - UIVIEW-32,  APRS+SA, or ??? for the software. I already have the 
> first two.
> 2 - Looking at my location, low power (3 watts, J-Pole about 20 ft 
> HAAT) or get something with more?
> 3 - See #1, but if I can't do WIDEN-N, should I have an alias of WIDE1-1?
> 4 - Will the Kenwood run on straight 12 volts or do I need to reduce 
> it to the 8.4 the battery supply would have been? My Icom H/T will run 
> on anything from 7 to 14, but I can't find a spec on the Kenwood 
> anyplace.
>
> Thanks!
> Joe N3HGB
>
>>  
>>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
>


-- 
"One ought never to turn one's back on a threatened danger and try to run away from it. If you do that, you will double the danger. But if you meet it promptly and without flinching, you will reduce the danger by half. Never run away from anything. Never!" -- Winston Churchill