[aprssig] D700 serial port problem
Wes johnston wes at kd4rdb.comWed Mar 8 22:26:38 UTC 2006
- Previous message: [aprssig] D700 serial port problem
- Next message: [aprssig] Fwd: PCSAT-1, PCSAT2 Joint operations.
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mine did a similar thing.... I had to change modes on the front panel (press F for 2 seconds, then TNC on the side menu). Once I cycled through the three TNC modes, it was working again. Wes ----- Original Message ----- From: "(SV2AGW)George Rossopoulos" <sv2agw at raag.org> To: "'TAPR APRS Mailing List'" <aprssig at lists.tapr.org> Sent: Wednesday, March 08, 2006 4:34 PM Subject: RE: [aprssig] D700 serial port problem > Hi > > No,no it sends garbage, I used the Kenwood uitlity to upload memories etc > but crashes. > > 73 > > > micro USB TNT (A pocket TNC with Build in Tracker and APRS digi with USB > and > battery for portable operation) > www.elcom.gr > > (SV2AGW)George Rossopoulos > sv2agw at elcom.gr > www.elcom.gr/sv2agw > +306932465216 > George Rossopoulos > Nikanoros 59 > 54250,Thessaloniki > Greece > > -----Original Message----- > From: aprssig-bounces at lists.tapr.org > [mailto:aprssig-bounces at lists.tapr.org] > On Behalf Of Andrew Rich > Sent: Wednesday, March 08, 2006 11:17 PM > To: sv2agw at elcom.gr; TAPR APRS Mailing List > Subject: RE: [aprssig] D700 serial port problem > > George, > > It was not in the non aprs mode ? > > Where it sends the freq, sig strength, active band etc ? > > Do they call it D700 command mode ? > > > > ----------------------------------------- > Andrew Rich > Amateur radio callsign VK4TEC > email: vk4tec at tech-software.net <mailto:vk4tec at tech-software.net> > web: http://www.tech-software.net > Brisbane AUSTRALIA > > > > -----Original Message----- > From: aprssig-bounces at lists.tapr.org > [mailto:aprssig-bounces at lists.tapr.org]On Behalf Of (SV2AGW)George > Rossopoulos > Sent: Thursday, 9 March 2006 7:07 AM > To: 'TAPR APRS Mailing List' > Subject: [aprssig] D700 serial port problem > > > Hi > > I had the follow problem. The serial port sends continuously data > (meaningless). > Anyone any idea what may be the problem, Reset does not fixes it. > Everything else works just fine, except the serial port. > > Thanks in advance for any help > > > micro USB TNT (A pocket TNC with Build in Tracker and APRS digi with USB > and > battery for portable operation) www.elcom.gr > > (SV2AGW)George Rossopoulos > sv2agw at elcom.gr > www.elcom.gr/sv2agw > +306932465216 > George Rossopoulos > Nikanoros 59 > 54250,Thessaloniki > Greece > > > > > _______________________________________________ > aprssig mailing list > aprssig at lists.tapr.org > https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig > > > > _______________________________________________ > aprssig mailing list > aprssig at lists.tapr.org > https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig > > > > _______________________________________________ > aprssig mailing list > aprssig at lists.tapr.org > https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig >
- Previous message: [aprssig] D700 serial port problem
- Next message: [aprssig] Fwd: PCSAT-1, PCSAT2 Joint operations.
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the aprssig mailing list
