Order Tray | Contact Us | Home | SIG Lists

[aprssig] An Anniversary Cheer for Stephen Smith

Cap Pennell cap at cruzio.com
Wed Mar 29 02:28:26 UTC 2006


All these hops!  West of the Rockies (where our digis are on hill-tops
instead of water towers) WIDE1-1,WIDE2-1 is enough for a mobile station to
set for routine or special event use, and plain WIDE2-2 does the job for a
home or Base (fixed, non-moving) station.  These two-hop digipaths are
enough to get the stations seen on the internet and over a broad area on
VHF.  Have you tried them?  Many commuters find plain WIDE1-1 is adequate
for their routine needs.
Don't they?

73, Cap KE6AFE


> -----Original Message-----
> From: aprssig-bounces at lists.tapr.org
> [mailto:aprssig-bounces at lists.tapr.org]On Behalf Of Ron Stordahl
> Sent: Tuesday, March 28, 2006 15:25 PM
> To: J. Lance Cotton
> Cc: TAPR APRS Mailing List
> Subject: Re: [aprssig] An Anniversary Cheer for Stephen Smith
>
>
> Lance:
>
> High digi's also must respond to WIDE1-1, thus when the initial packet
> of WIDE1-1,WIDE3-3 is heard by a high digi, which will typically be the
> most common case, it will repeat it with WIDE1-1 used up, but followed
> by WIDE3-3 which will provide for three additional hops.  Thus
> WIDE1-1,WIDE3-3 is in most cases a 4 hop path for the current
> configuration of digi's in a N=3 area.  And thus the limit has
> been broken.
>
> Ron, N5IN






More information about the aprssig mailing list