[aprssig] Help with DSL Modem
Jim Duncan jdbandman at earthlink.netTue Oct 10 23:38:51 UTC 2006
- Previous message: [aprssig] Help with DSL Modem
- Next message: [aprssig] Jim Duncan, KU0G
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
What kind of DSL modem are you using? I had a similar problem when I upgraded from a BEFR to a WRT54G here. Sprint (my local provider) gave me a set of commands to send to the modem through telnet access which made everything hunky-dorey... Jim Duncan, KU0G P.S. Ya, it's really me! Just spend most of my time in "lurk" mode since "the high-jacking" Mark Fellhauer wrote: > > I ran into a problem today. > > We're trying to replace an old BEFSR41 Linksys router that's mated to a > Verizon Westell 2110 DSL Modem. The current modem is set to DHCP on > the WAN side, so I went ahead and plugged in a new Linksys WRT54GS > Router into the Westell and expected to be back online in seconds. That > turned into a 3 hour ordeal before giving up for the day. > > For some reason the old router works perfectly, but a new WRT54GS and a > D-Link WBR-1310 REFUSE to accept an IP address on the WAN side from the > Westell. I even spent about an hour with a Verizon tech and stumped > her too. > > We did power resets and even hard resets and the old DSL modem will not > link up with either new router. Tried MAC cloning - no good. Plug in > the old router and it runs like a champ using the same cable. Could it > be that I need to use a x-over cable? I would have tried that, but > forgot to bring one. I would think that's not the issue... a new > router should auto MDIX. > > Anybody got any suggestions for getting the two to work? This site is > 44 miles away and on the side of a mountain. I'd rather not have to > drive there much more. > > We're not against replacing the DSL modem, but I'd like not to have to > deal with reprovisoning a new DSL modem. We need wireless and have run > into an issue with Port Forwarding on the old Linksys and the software > vendor assures us his software will work with a newer router. If this > weren't the issue I have about a dozen Senao 2611's that I'd chunk onto > the BEFSR41 for wireless access... > > > 73, > > Mark > KC7BXS > > > _______________________________________________ > aprssig mailing list > aprssig at lists.tapr.org > https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig > -- 73 de Jim, KU0G
- Previous message: [aprssig] Help with DSL Modem
- Next message: [aprssig] Jim Duncan, KU0G
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the aprssig mailing list
