Order Tray | Contact Us | Home | SIG Lists

[aprssig] UI-VIEW RIGBLASTER NOMIC

Stephen H. Smith wa8lmf2 at aol.com
Fri Oct 13 19:47:27 UTC 2006


julien9z4fz at gmail.com wrote:
> Hi good day i am looking for some help i am running ui-view and i am 
> trying to hook up my tm-d700a radio to my pc with ui-view,i am only 
> seeing the tm-d700a key down .
>  
> I  check the nomic set up it is ok for the radio,but why i am seeing 
> on air the radio is key down .i want to set up a gate way with ui-view 
> and kenwood radio tm-d700a,any help will be welcome
>
> -- 



You don't need the Rigblaster at all; it is irrelevant to the D700 
setup.  The Kenwood already has a TNC in it!   You need to bring serial 
data out of the radio directly to the computer's serial port, not audio 
to the PC's sound card.  

The Rigblaster (or any other "soundcard interface") IS NOT a TNC or 
modem. No data comes out of the serial port on the Rigblaster.   Remove 
the Rigblaster and connect the Kenwood's DB9 serial port directly to the 
PC's serial port with a straight-thru (not a null-modem cross-over 
cable) serial cable, and select the D700 option in the UIview "Setup, 
Comms" menu.  




--

Stephen H. Smith    wa8lmf (at) aol.com
EchoLink Node:      14400    [Think bottom of the 2M band]
Home Page:          http://wa8lmf.com


NEW!   JavAPRS Filter Port 14580 Guide
  http://webs.lanset.com/wa8lmf/aprs/JAVaprsFilters.htm

UI-View Misc Notes and FAQ
  http://webs.lanset.com/wa8lmf/aprs/UIview_Notes.htm

"APRS 101"  Explanation of APRS Path Selection & Digipeating
  http://webs.lanset.com/wa8lmf/DigiPaths

Updated "Rev G" APRS            http://webs.lanset.com/wa8lmf/aprs
Symbols Set for UI-View,
UIpoint and APRSplus:






-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tapr.org/pipermail/aprssig/attachments/20061013/71216cec/attachment.htm 


More information about the aprssig mailing list