[aprssig] Too many digi's ?

[Patrick Green]

Hi Cap,

  The TN digi in question is a "T" overlay.  It's so old, the TNC needs to
be replaced to get up ot standard.

As far as paths are concerned, I'll use a path that works.  If someone is
still running RELAY and that's the only station, I can hit, I'll use that to
be heard.  It'll be awhile until every area is up to date.  Some areas are
custom too like the "SHASTA" digi in CA.  It didn't support Wn-N when I was
there and doubt it ever would.

73 de Pat --- KA9SCF.

On 10/25/06, Cap Pennell <cap at cruzio.com> wrote:
>
>  <snip>
> Actually, if WA4KJH-7 actually supported Wn-N, you would see the KF4OWQ-2
> London, KY digi, because when in the Cumberland gap, I could hear both fine
> and I could bounce via both of them when using a capatible path (WIDE1-1,TN
> on the London side, and TN,WIDE2-1 on the TN side).  It's good to hear about
> the new sites.
> <snip>
>
> Huh?  A plain "SS"  alias like TN is obsolete too.  I hope you meant
> "WIDE1-1,TN1-1 on the London side and TN1-1,WIDE2-1 on the TN side".  But
> to be heard through both digis, why not simply use the standard recommended
> mobile path of WIDE1-1,WIDE2-1 or the equivalent from home or Base, plain
> WIDE2-2 for those two hops?
> 73, Cap
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tapr.org/pipermail/aprssig/attachments/20061025/630872de/attachment.htm