[aprssig] Re: aprssig APRS Telemetry

[Andy AB9FX]

Bob,
I tried many times to change in KPC3+ TOCALL for telemetry at SR3DGT.
Whatever is put in the UNPROTO dest address, packets are sent with dest
address BEACON. Now, there is KPC3+ v9.1, before 8.3 and 9.0 with the same
results.
Some settings for our digi/wx/tlm with solar panel (only power source)
http://www.aprs.pl/gontyniec.htm
Analog telemetry: 1 - battery voltage, 2 - current from the solar panel, 4
- temperature inside of the KPC3+.
73!
Andy SP3LYR


----- Original Message -----
From: "Robert Bruninga" <bruninga at usna.edu>
To: "'TAPR APRS Mailing List'" <aprssig at lists.tapr.org>
Sent: Thursday, September 07, 2006 16:41
Subject: RE: [aprssig] Re: aprssig APRS Telemetry


>
> Ah, but that is why we are proposing this initiative.  As it is,
> The KPC-3+ format is fixed and cannot be changed and nothing
> Can be added to the end of it.  Hence, the use of the "version
> Number" in the TOCALL  format to specify a specific common
> application
> (if any)...
>