Order Tray | Contact Us | Home | SIG Lists

[aprssig] Recommended IGate Connection

AE5PL Lists HamLists at ametx.com
Mon Sep 11 13:49:29 UTC 2006


> -----Original Message-----
> From: Joel Maslak
> Posted At: Sunday, September 10, 2006 11:11 PM
> Subject: [aprssig] Recommended IGate Connection
> 
> Right now, I use aprsd (2.2.5 I think).  I'm using the 
> following to connect to the internet stream in the aprsd.conf:
> 
> Server rotate.aprs.net 23 hub-sr
> 
> I'm not sure I'm using the prefered port (or other options 
> for that matter).
> 
> What's the current recommendations for systems like mine?  I 
> want to support message traffic to my local RF users, but 
> less bandwidth for the upstream server would be a good thing 
> if it doesn't impact my local users.

If you are using aprsD as only an IGate, have it connect to port 14580
on the servers.  This is minimal bandwidth but fully supports messaging.
You can also use javAPRSSrvr which gives you the ability to add filters
to the upstream login if you want to see certain other things.
javAPRSSrvr is free for amateur use by emailing to me directly at
pete at ae5pl.net (not my list address).

73,

Pete Loveall AE5PL
mailto:pete at ae5pl.net 




More information about the aprssig mailing list