[aprssig] APRS & IRLP

[Herb Gerhardt]

I use WinAPRS Version 2.8.5 and sending a message to 'APRSDEPOT' will not
work.  It needs to be addressed to a Ham Call type designation like APRS-1
or APRSDE-1 or like WLNK-1.  Not sure how other APRS platforms work but this
system does not work with WinAPRS.

Might I suggest perhaps using IRLP-1 for the address and have your APRSDEPOT
snag it and then send out the reply.

Herb, KB7UVC
NW APRS Group, West Sound Coordinator
Our WEB Site:  http://www.nwaprs.info



> -----Original Message-----
> From: aprssig-bounces at lists.tapr.org
> [mailto:aprssig-bounces at lists.tapr.org]On Behalf Of Robert Bruninga
> Sent: Tuesday, September 19, 2006 12:49 PM
> To: 'TAPR APRS Mailing List'
> Subject: RE: [aprssig] APRS & IRLP
>
>
> Eric,
> Great work.
>
> I am all for integrating IRLP and ECHOlink information into
> LOCAL APRS.  Anything we can do to improve on getting info to
> LOCAL mobile users is great.  We need to get going on getting
> those IRLP and ECHOlink beacons out of 144.39...   We had them
> at one time...  May need to get that going again...
>
> Bob, WB4APR
>
> > -----Original Message-----
> > From: aprssig-bounces at lists.tapr.org
> > [mailto:aprssig-bounces at lists.tapr.org] On Behalf Of Eric
> Goforth
> > Sent: Tuesday, September 19, 2006 3:39 PM
> > To: TAPR APRS Mailing List
> > Subject: [aprssig] APRS & IRLP
> >
> > Figured this new utility I wrote for APRS would be of
> > interest to those that use IRLP.  Works great on the D700
> > while mobile!
> >
> > Today I launched a new function to the APRS Depot
> > (www.aprsdepot.com) AR project that relates to IRLP.  Thought
> > everyone would find it interesting...  Send a message to
> > 'APRSDEPOT' with the word 'IRLP'...  Find out where the
> > nearest node is based on your last known APRS location..
> >
> > Details of the service and other AR functions can be found at
> > http://www.aprsdepot.com/forum/index.php?topic=60.0
> >
> > 73's
> > Eric J. Goforth, N6GOF
> >