[ui-view] Re: [aprssig] RE: New EU Paradigm also Uiview32 and New-N for the USA

[Cap Pennell]

Right, for a MiNnesota (UIFLOOD=MN) "Wn,MNn" digi.  And to make it a
"W2,MNn" digi you could add WIDE3-3,WIDE3-2 to the list already at ALIAS=

And in the UI-View32 program:
Setup,Station Setup,Beacon comment:PHG5110/W2,NCAn/Minneapolis <substitute
your actual PHG and City here>
Setup,Station Setup,Symbol:No.Digi O'ly:S

73, Cap KE6AFE

> -----Original Message-----
> From: ui-view at yahoogroups.com [mailto:ui-view at yahoogroups.com]On Behalf
> Of Ron Stordahl
> Sent: Thursday, September 21, 2006 10:56 AM
> To: TAPR APRS Mailing List
> Cc: ui-view at yahoogroups.com
> Subject: [ui-view] Re: [aprssig] RE: New EU Paradigm also Uiview32 and
> New-N for the USA
>
>
> Here is the pertinent section of the Uiview32.ini file for digipeating
> which I believe is in accordance with the New-N Paradigm for the USA:
>
> [DIGI_OPTIONS]
> DIGI_ENABLED=TRUE
> UI_ONLY=FALSE
> ALIAS_SUBSTITUTION=TRUE
> DUPE_SUPPESS_SECONDS=30
> ALIAS=N5IN-4,WIDE4-4,WIDE4-3,WIDE4-2,WIDE4-1,WIDE5-5,WIDE5-4,WIDE5
> -3,WIDE5-2,WIDE5-1,WIDE6-6,WIDE6-5,WIDE6-4,WIDE6-3,WIDE6-2,WIDE6-1
> ,WIDE7-7,WIDE7-6,WIDE7-5,WIDE7-4,WIDE7-3,WIDE7-2,WIDE7-1
> UIFLOOD=MN
> UITRACE=WIDE
> WIDEN-N=TRUE
> TRACEN-N=TRUE
> SUBST_ALIAS=N5IN-4
> EXCLUDED=""
> [DIGI_ROUTES]
> 1=""
> 2=2
> 3=""
> 4=""
> 5=""
> 6=""
> 7=""
> 8=""
> 9=""
> 10=""
> 11=""
> 12=""
> 13=""
> 14=""
> 15=""
> 16=""
>
> This configuration allows up to WIDE3-3.  It will digipeat (and
> decrement) WIDE1-1,WIDE2-2 and (unfortunately perhaps) also
> WIDE1-1,WIDE3-3.  WideN-n is traced.  In this case SS is MN (Minnesota).
>
> If someone believe this configuration is incorrect I would like to
> know.  Perhaps column width issues with e-mail will mess up this info
> above.  I could attach the entire Uiview32.ini file or better yet, those
> who want to see it can pick it up here:
>
> http://dxspots.com/uiview32.ini
>
>
> Ron, N5IN