[ui-view] Re: [aprssig] RE: New EU Paradigm also Uiview32 and New-N for the USA

[Ron Stordahl]

Cap...in my uiview32.ini file I have my beacon comment as:

BEACON_COMMENT=PHG6360 W3,MNn Thief River Falls MN 146.85-

Notice I have no "/" following the PHG6360 nor after the MNn.  I believe 
it's Bob Bruninga WB4APR's  recommendation not to use the "/".  I don't 
know why however.

Ron, N5IN

Cap Pennell wrote:
> Right, for a MiNnesota (UIFLOOD=MN) "Wn,MNn" digi.  And to make it a
> "W2,MNn" digi you could add WIDE3-3,WIDE3-2 to the list already at ALIAS=
>
> And in the UI-View32 program:
> Setup,Station Setup,Beacon comment:PHG5110/W2,NCAn/Minneapolis <substitute
> your actual PHG and City here>
> Setup,Station Setup,Symbol:No.Digi O'ly:S
>
> 73, Cap KE6AFE
>
>   
>> -----Original Message-----
>> From: ui-view at yahoogroups.com [mailto:ui-view at yahoogroups.com]On Behalf
>> Of Ron Stordahl
>> Sent: Thursday, September 21, 2006 10:56 AM
>> To: TAPR APRS Mailing List
>> Cc: ui-view at yahoogroups.com
>> Subject: [ui-view] Re: [aprssig] RE: New EU Paradigm also Uiview32 and
>> New-N for the USA
>>
>>
>> Here is the pertinent section of the Uiview32.ini file for digipeating
>> which I believe is in accordance with the New-N Paradigm for the USA:
>>
>> [DIGI_OPTIONS]
>> DIGI_ENABLED=TRUE
>> UI_ONLY=FALSE
>> ALIAS_SUBSTITUTION=TRUE
>> DUPE_SUPPESS_SECONDS=30
>> ALIAS=N5IN-4,WIDE4-4,WIDE4-3,WIDE4-2,WIDE4-1,WIDE5-5,WIDE5-4,WIDE5
>> -3,WIDE5-2,WIDE5-1,WIDE6-6,WIDE6-5,WIDE6-4,WIDE6-3,WIDE6-2,WIDE6-1
>> ,WIDE7-7,WIDE7-6,WIDE7-5,WIDE7-4,WIDE7-3,WIDE7-2,WIDE7-1
>> UIFLOOD=MN
>> UITRACE=WIDE
>> WIDEN-N=TRUE
>> TRACEN-N=TRUE
>> SUBST_ALIAS=N5IN-4
>> EXCLUDED=""
>> [DIGI_ROUTES]
>> 1=""
>> 2=2
>> 3=""
>> 4=""
>> 5=""
>> 6=""
>> 7=""
>> 8=""
>> 9=""
>> 10=""
>> 11=""
>> 12=""
>> 13=""
>> 14=""
>> 15=""
>> 16=""
>>
>> This configuration allows up to WIDE3-3.  It will digipeat (and
>> decrement) WIDE1-1,WIDE2-2 and (unfortunately perhaps) also
>> WIDE1-1,WIDE3-3.  WideN-n is traced.  In this case SS is MN (Minnesota).
>>
>> If someone believe this configuration is incorrect I would like to
>> know.  Perhaps column width issues with e-mail will mess up this info
>> above.  I could attach the entire Uiview32.ini file or better yet, those
>> who want to see it can pick it up here:
>>
>> http://dxspots.com/uiview32.ini
>>
>>
>> Ron, N5IN
>>     
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>