[aprssig] SSID for RF only Station with backup power

[John Habbinga]

Earl.  You sent an APRS message to Joey, who was on RF.  Your message passed 
through the gateway, which put you on RF through the gateway.  I'm sorry 
that I asked you not to beacon one per minute while you were parked.  Feel 
free to beacon as often as you would like.

----- Original Message ----- 
From: "Earl Needham" <earl_needham at yahoo.com>
To: "TAPR APRS Mailing List" <aprssig at lists.tapr.org>
Sent: Tuesday, April 10, 2007 9:54 AM
Subject: Re: [aprssig] SSID for RF only Station with backup power


> At 12:05 PM 4/9/2007, John Habbinga wrote:
>>>The problem with the tags in the comment fields is that it doesn't
>>>allow selecting stations on an APRS map.
>>
>>I'm not sure I understand what you are trying to do.  If you only want to 
>>see stations that are transmitting on RF, don't connect to an APRS server, 
>>just monitor 144.390 MHz.  All the stations that you see on the APRS map 
>>will be on RF.
>
>         Did I misunderstand?  I thought you told me that any station in 
> the Lubbock area, that's on TCP/IP only, is gated out to 144.39.  That 
> means that every station you see on 144.39 is NOT necessarily on RF.
>
>         7 3
>         Earl
>
> KD5XB -- Earl Needham
> Clovis, New Mexico DM84jk
> http://groups.yahoo.com/group/cw_bugs
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig