Order Tray | Contact Us | Home | SIG Lists

[aprssig] KPC-9612 Loader

Robert Bruninga bruninga at usna.edu
Mon Apr 23 18:09:35 UTC 2007


Apparently the KPC-9612 (non-plus) can only be a first-hop
WIDE1-1 digi and a cross-baud 9600-to-1200 baud digipeater.  It
does not digipeat on its MYNODE as I had hoped below.

> -----Original Message-----
> > port 1 is 144.390 @ 1200 and Port 2 is 430.100 @ 9k6.
> 
> ...It has none of the special APRS digipeating modes, 
> ...set it up as a WIDE1-1 fill in digi only.
> 
> MYALIAS WIDE1-1
* MYNODE  WIDE2-2     <== this does not work
> BTEXT !DDMM.hhN1DDDMM.hhW#W1,W2 only. comments
> B E 10
> UNPROTO AP9612
> MYGATE WIDE1-1
> 
> ...The above settings will allow it to do these things:
> 1) Beacon its position every 10 minues DIRECET only
> 2) It will digipeat only the first hop (W1-1)
> 3) It will gateway 9600 baud packets to 1200 baud
> 4) It will appear as s DIGI icon with an overlay of "1" 
> 
> Tell all mobiles in the area to use the path of VIA 
> WIDE1-1,WIDE2-1 if your area is a 2 hop area.  If it 
> permits 3 hops then they use VIA WIDE1-1, WIDE2-2.
> 
> 9600 baud users on the UHF channel should also use 
> WIDE1-1,WIDE2-2 and they will be cross linked from UHF at 
> 9600 to the 144.39 at 1200





More information about the aprssig mailing list