Order Tray | Contact Us | Home | SIG Lists

[aprssig] D-710 at FCC test site

Stephen H. Smith wa8lmf2 at aol.com
Mon Aug 6 15:34:45 UTC 2007

khufford at comcast.net wrote:
> FCC ID number is k44397700
> It is for the D-710 and its parent
> https://gullfoss2.fcc.gov/oetcf/eas/reports/ViewExhibitReport.cfm?mode=Exhibits&RequestTimeout=500&calledFromFrame=N&application_id=170423&fcc_id='K44397700' 
> <https://gullfoss2.fcc.gov/oetcf/eas/reports/ViewExhibitReport.cfm?mode=Exhibits&RequestTimeout=500&calledFromFrame=N&application_id=170423&fcc_id=%27K44397700%27>
> Kent

For those hoping for up-dateable firmware this is a disappointment.    
(from "Letter of Attestation" document at above site)

"T his letter attests to the fact that Kenwood scanner receiver models 
TM-V71A /
TM-D710A meets the requirements of the FCC Rules, 15.121(a). Compliance is
achieved through the following method(s):

(1). The Microprocessor employed has internal flash memory, however the
programming information cannot be read out from the Microprocessor, 
therefore it has
same means of protection as a masked Microprocessor .

(2). The Microprocessor is not to accept programming, selection, 
scanning or direct
entry of Cellular band frequencies.

(3). Filtering precludes reception of mixer images or harmonics of 
Cellular band

(4). Subminiature SMD assembly and inaccessible multiplayer PCB 
construction all but
precludes attempts at circuit hardware modifications.
Tamaki Shimamura
Communication Equipment Division
Kenwood Corporation "


Stephen H. Smith    wa8lmf (at) aol.com
EchoLink Node:      14400    [Think bottom of the 2M band]
Home Page:          http://wa8lmf.com  --OR--   http://wa8lmf.net

NEW!   World Digipeater Map

JavAPRS Filter Port 14580 Guide

"APRS 101"  Explanation of APRS Path Selection & Digipeating

Updated "Rev H" APRS            http://wa8lmf.net/aprs
Symbols Set for UI-View,
UIpoint and APRSplus:

More information about the aprssig mailing list