OT: RE: [aprssig] D-710 at FCC test site

[Scott Miller]

> There is a connection on the D700 for a ribbon connector that is wired 
> to the In-circuit programming pins of the D700.  However, I couldn't 
> find anything that would program it except for the appropriate NEC 
> programming appliance, which was more expensive than my self-serving 
> research budget would allow. :)

Is there a published spec?  Some of the Freescale device programmers are 
rather expensive, but you can build your own for a few bucks with 
information that's in the data sheet.

Not that I'd want to tackle reverse-engineering the D710...

Scott
N1VG