[aprssig] Remote Monitoring of Temperature

Matt Werner kb0kqa at gmail.com
Fri Aug 17 16:31:24 CDT 2007

Why not just either combine the digi with the weather station (if this
is doable - you didn't mention what you're running for a digi), or use
a small, very low power transmitter on 144.39 to output your telemetry
and use the digi as...a digi to repeat it off the mountain top?

On 8/17/07, Dave Sloan <desloan at earthlink.net> wrote:
> Hello,
>    We have a repeater that is on a remote mountain top (just over 10.000
> feet). We have several systems co-located in the same building with our
> repeater. The temperature of the building has been an issue in the past. We
> are adding another occupant to the building. I have suggested that we
> install a weather station (placing the temperature sensor inside) and then
> output the data using APRS. We have a digi that is already located at the
> location and so was thinking of using a different frequency. Does anyone
> have a suggestion for a frequency (maybe even on 440 might be best)? Any
> advice or suggestions will be appreciated.
> Thanks & 73,
> Dave N0EOP
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig

More information about the aprssig mailing list