[aprssig] KPC-3 Plus - no tones
rbogdan at ursinus.edu
Wed Aug 22 18:04:02 CDT 2007
Argg, did the reset but didn't think of checking the battery. I had to
replace the batteries in both Tiny-2's I have a few years ago, but
didn't think of that while the box was open.
BTW it worked!
From: aprssig-bounces at lists.tapr.org
[mailto:aprssig-bounces at lists.tapr.org] On Behalf Of Chuck Gooden
Sent: Tuesday, August 21, 2007 23:27
To: TAPR APRS Mailing List
Subject: Re: [aprssig] KPC-3 Plus - no tones
As long as your going to do a hard reset don't forget to check the
Richard Amirault wrote:
> ----- Original Message ----- From: "Bogdan, Rick"
>> I'm running it in KISS mode using Ui-View . I gave it a RESTORE D
> command from HyperTerminal, came back said PRESS (*) TO SET BAUD RATE,
> I did and it asked for my call, I entered it and the unit stopped
> responding. Hit the RETURN key and the curser skips down a few lines
> and there is no other response. Did RESTORE D again with the same
> response. Now it doesn't receive either.
> I've had this TNC since '00 and the last five years running it as a
> IGATE with out any problems till now.
> Sounds like it's time to do a *hardware* reset. Look in your manual.
> Richard Amirault
> Boston, MA, USA
> aprssig mailing list
> aprssig at lists.tapr.org
aprssig mailing list
aprssig at lists.tapr.org
More information about the aprssig