[aprssig] Repeater Objects

[Wes Johnston, AI4PX]

Another way to TX objects is to program your TNC's LT1 buffer to transmit
the object and the LTP path to aprs v <yourdigi>.  Now you can program the
local voice repeater object to tx via ONE HOP, every 10 minutes.  It is not
AS desirable as directly from the digi, but it's a good 2nd place.

Wes

On 8/30/07, Joseph M. Durnal <joseph.durnal at gmail.com> wrote:
>
> I contacted the local digipeater owner and asked if it would be
> possible to add a local repeater object to the digipeater BTEXT.  The
> response was simply "thanks for asking, but no", and I'm once again
> confused.  I understand that the best place to put an object is in the
> BTEXT of a digipeater, but if that isn't an option, what should I do?
>
> I figure my choices are.
> 1. Transmit them from my home station and go against the
> recommendations in:
> http://cadigweb.ew.usna.edu/~bruninga/localinfo.html
>
> 2. Set up another digi in my area (which seems completely unnecessary,
> and I bet you guys will tell me it would actually be harmful to the
> network).
>
> 3. Forget the idea all together and not make this local information
> available to the area.
>
> Are there any other options?
>
> Thanks & 73 de Joe NE3R
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>



-- 
In theory there is no difference between practice and theory.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tapr.org/pipermail/aprssig/attachments/20070830/817ec982/attachment.htm