Order Tray | Contact Us | Home | SIG Lists

[aprssig] KPC9612+

Cap Pennell cap at cruzio.com
Sun Dec 2 22:27:45 UTC 2007


Right, Doug!  Like using the KPC-9612+ for a 9600 Telpac Node for the
neighborhood instead.  All one needs for a modern VHF APRS "S overlay" digi
is an old TNC-2 (like a MFJ-1270 or a PacComm Tiny-2) with a new EPROM setup
with the free UIDIGI software.  Or a KPC-3 (v8.2 and up).  Or the UI-View32
application in KISS Mode.  Or a OpenTracker2.  Etc.  But not all of those
can allow use of 9600 baud.
73, Cap

> -----Original Message-----
> From: aprssig-bounces at lists.tapr.org
> [mailto:aprssig-bounces at lists.tapr.org]On Behalf Of Doug Ferrell, KD4MOJ
> Sent: Sunday, December 02, 2007 12:32 PM
> To: TAPR APRS Mailing List
> Subject: RE: [aprssig] KPC9612+
>
>
> -----Original Message-----
> From: aprssig-bounces at lists.tapr.org
> [mailto:aprssig-bounces at lists.tapr.org]On Behalf Of Michael J. Wolthuis
> Sent: Sunday, December 02, 2007 1:38 PM
> Subject: [aprssig] KPC9612+
>
>
> Can a KCP9612+ ver 8.0 be used as a "S" digi or do I need to get a fimware
> chip into it to get it up to 9.x?
>
> Mike
> kb8zgl
>
>
>
>    Mike it would work best with the 9.1 ROM. Better yet, put that 9612+ to
> better use and use a KPC3 or something! [GRIN]
>
> ...DOUG
> KD4MOJ





More information about the aprssig mailing list