[aprssig] Need Help With D700 UIDIGI settings

[Richard N. Piper IV]

I just looked at my TH-D7 and  I see

KC0RNP-1
ID

When I hit OK I see

KCORNP-1
KC0RNP / R

Nothing in miles

Nothing in Cordnates

Nothing in cse

Is my station set up correctly???

On 12/13/07, Richard N. Piper IV <richard.piper at media4god.org> wrote:
> This is everything I have in the Comand file for the D700. If I should
> change something let me know ASAP!!!
>
> ;This is a sample TNC initialisation file for use with
> ;the Kenwood TM-D700.
> ;TM-D700.ORG will allow you to revert to the default
> ;version of this file, if you edit it and mess it up!
>
> [SETUP]
> ;DON'T alter anything in this section unless you are
> ;sure you know what you are doing!
> COMMAND_PROMPT=cmd:
> COMMAND_CHARACTER_CODE=3
> ESCAPE_CHARACTER_CODE=
> CONV_COMMAND=CONV
> MYCALL_COMMAND="MYCALL "
> UNPROTO_COMMAND="UNPROTO "
> NO_BEACON_COMMAND=BEACON EVERY 0
>
> [INIT_COMMANDS]
> ^C
> AI 1!AI 1
> ;Control mode on.
> TC 1
> ;Select TNC PKT mode.
> TNC 2!TNC 2
> ;Select band 'A'.
> BC 0,0!BC 0,0
> ;Set the frequency to 144.800.
> FQ 00144800000,0!FQ 00144800000,0
> ;No shift.
> SFT 0!SFT 0
> ;Select data band as 'A'.
> DTB 0!DTB 0
> ;Control mode off.
> TC 0!cmd:!5
> ;Repeating the first two commands is not an error!
> ECHO OFF
> BEACON EVERY 0
> ECHO OFF
> BEACON EVERY 0
> DIGI ON
> GBAUD 4800
> HBAUD 1200
> GPSTEXT $GPRMC
> LTMON 10
> LTMHEAD ON
> LOC E 0
> MON ON
> MCOM ON
> MSTAMP OFF
> CONOK OFF
> PACLEN 250
> UIDIGI ON WIDE1-1
> UIFLOOD 30%
> UITRACE 30%
> XFLOW OFF
> HEADER OFF
> NEWMODE ON
> NOMODE OFF
>
> [EXIT_COMMANDS]
> LTMON 0
> MON OFF
> TC 1
> TNC 0
>


-- 
Richard N. Piper IV, Executive Director
Media4God Ministries - Enhancing Ministry Thru Media
Herrin IL 618-681-1624 richard.piper at media4god.org
http://www.media4god.org http://blog.media4god.org  http://forum.media4god.org

Where is KC0RNP-9? http://www.media4god.org/kc0rnp.html