[aprssig] Need Help With D700 UIDIGI settings
Robert Bruninga bruninga at usna.eduThu Dec 13 18:44:49 UTC 2007
- Previous message: [aprssig] Need Help With D700 UIDIGI settings
- Next message: [aprssig] Need Help With D700 UIDIGI settings
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
That is one of those ID packets that is of no value on APRS. So people need to remember to turn HID OFF in their digipeaters or this wasted packet is transmitted every 10 minutes everywhere. This useless HID packet doubles the load of the local digi on the local network, but for zero benefit to APRS. It is a digipeater packet. So must be turned off for all digipeaters. > -----Original Message----- > From: Richard N. Piper IV [mailto:richard.piper at media4god.org] > Sent: Thursday, December 13, 2007 1:24 PM > To: bruninga at usna.edu; TAPR APRS Mailing List > Subject: Re: [aprssig] Need Help With D700 UIDIGI settings > > I just looked at my TH-D7 and I see > > XXXXXX-1 > ID > > When I hit OK I see > > XXXXXX-1 > XXXXXX / R > > Nothing in miles > > Nothing in Cordnates > > Nothing in cse > > Is my station set up correctly??? > > On 12/13/07, Richard N. Piper IV <richard.piper at media4god.org> wrote: > > This is everything I have in the Comand file for the D700. > If I should > > change something let me know ASAP!!! > > > > ;This is a sample TNC initialisation file for use with > > ;the Kenwood TM-D700. > > ;TM-D700.ORG will allow you to revert to the default > > ;version of this file, if you edit it and mess it up! > > > > [SETUP] > > ;DON'T alter anything in this section unless you are > > ;sure you know what you are doing! > > COMMAND_PROMPT=cmd: > > COMMAND_CHARACTER_CODE=3 > > ESCAPE_CHARACTER_CODE= > > CONV_COMMAND=CONV > > MYCALL_COMMAND="MYCALL " > > UNPROTO_COMMAND="UNPROTO " > > NO_BEACON_COMMAND=BEACON EVERY 0 > > > > [INIT_COMMANDS] > > ^C > > AI 1!AI 1 > > ;Control mode on. > > TC 1 > > ;Select TNC PKT mode. > > TNC 2!TNC 2 > > ;Select band 'A'. > > BC 0,0!BC 0,0 > > ;Set the frequency to 144.800. > > FQ 00144800000,0!FQ 00144800000,0 > > ;No shift. > > SFT 0!SFT 0 > > ;Select data band as 'A'. > > DTB 0!DTB 0 > > ;Control mode off. > > TC 0!cmd:!5 > > ;Repeating the first two commands is not an error! > > ECHO OFF > > BEACON EVERY 0 > > ECHO OFF > > BEACON EVERY 0 > > DIGI ON > > GBAUD 4800 > > HBAUD 1200 > > GPSTEXT $GPRMC > > LTMON 10 > > LTMHEAD ON > > LOC E 0 > > MON ON > > MCOM ON > > MSTAMP OFF > > CONOK OFF > > PACLEN 250 > > UIDIGI ON WIDE1-1 > > UIFLOOD 30% > > UITRACE 30% > > XFLOW OFF > > HEADER OFF > > NEWMODE ON > > NOMODE OFF > > > > [EXIT_COMMANDS] > > LTMON 0 > > MON OFF > > TC 1 > > TNC 0 > > > > > -- > Richard N. Piper IV, Executive Director > Media4God Ministries - Enhancing Ministry Thru Media > Herrin IL 618-681-1624 richard.piper at media4god.org > http://www.media4god.org http://blog.media4god.org > http://forum.media4god.org > > Where is KC0RNP-9? http://www.media4god.org/kc0rnp.html >
- Previous message: [aprssig] Need Help With D700 UIDIGI settings
- Next message: [aprssig] Need Help With D700 UIDIGI settings
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the aprssig mailing list
