[aprssig] Need Help With D700 UIDIGI settings

[Keith VE7GDH]

Richard KC0RNP wrote...

> This is everything I have in the Comand file for the D700. If I should
> change something let me know ASAP!!!

While there must be many UI-View users on this list, your question 
should really be asked over on the UI-View list.

> ;Set the frequency to 144.800.
> FQ 00144800000,0!FQ 00144800000,0

While the above setting will help reduce QRM on 144.390, it won't do 
much to enhance your presence on APRS in North America. I would suggest 
changing it to 144.390. The first line is just a comment. The second 
line sets the operating frequency in the D700 when you are using it in 
UI-View...

;Set the frequency to 144.390.
FQ 00144390000,0!FQ 00144390000,0

> DIGI ON

If you leave that ON, the D700 continue to digipeat. Any D700/UI-View 
users that would care to comment on this? I suppose it could be feasible 
to leave it set on with UIDIGI set to WIDE1-1 and let the D700 digi 
independantly of UI-View. If you want UI-View to take over the digipeat 
function, the D700 would have to be in KISS mode. A few people have 
reported they can get away with it, but most people run into problems 
because of the small buffer in the D700s TNC.

73 es cul - Keith VE7GDH
--
"I may be lost, but I know exactly where I am!"