Order Tray | Contact Us | Home | SIG Lists

[aprssig] Weather Bulletins for Central/South Central PA

Keith VE7GDH ve7gdh at rac.ca
Mon Dec 17 03:55:01 UTC 2007


Stephen WA8LMF wrote...

> 2) Assuming you ARE using an Internet connection, what port number are
> you using on the APRS server login? If you are using the user-defined
> filter port 14580, you need to add the expression  t/n  to the
> "Extra long-on text" filter command in UI-View's "APRS Server Setup"
> dialog.

Just for those that aren't aware what the "t/n" does... this is adding a
type filter and that the "n" means "NWS Weather and NWS Area Objects".
Look in the UI-View help for FILTER.TXT. This is easiest done by
bringing up the APRS Server Setup and hitting F1 and then scrolling down
to the FILTER.TXT link.

An updated copy of FILTER.TXT can be obtained at 
http://f5vag.eu/filter_guide.html.

> Note that after you make the edit, you have to disconnect from an
> APRS server and then re-connect for the new filter to have any effect.

That is probably what most people will do, but there is an another
option. First, if they want the change to be permanent, they should
enter the new filter in the "extra logon-on text" but there is a way to
change a filter "on the fly" without disconnecting. First, you can
interrogate the port 14580 servers by sending a message on port I
(India) with "filter?" (without the quotes) to verify your current
filter. To change it, just send a message to SERVER on port I with the
new filter. It must be the complete filter... not just what you are
adding... e.g.

filter m/200 t/n -b/CW*

The change will take effect right away. If you change the filter but
don't also edit the "extra logon text" it will revert back to the old
filter if you get disconnected and reconnected.

73 es cul - Keith VE7GDH
--
"I may be lost, but I know exactly where I am!"





More information about the aprssig mailing list