Order Tray | Contact Us | Home | SIG Lists

[aprssig] ALogger 3.0.0 released, KISS and remote client support

Andy AB9FX ab9fx at aprs.pl
Sat Feb 10 21:56:42 UTC 2007


by mistake, I've sent it to aprssig
sorry
Andy



----- Original Message ----- 
From: "Andy AB9FX" <ab9fx at aprs.pl>
To: "TAPR APRS Mailing List" <aprssig at lists.tapr.org>
Sent: Saturday, 10 February, 2007 15:26
Subject: Re: [aprssig] ALogger 3.0.0 released, KISS and remote client 
support


> Bill,
> I'm all the time busy and busy, next week on travel, again (now CA). Just 
> some thoughts about APRS and Vista. Maybe you are familiar with them all, 
> maybe not. I upgraded my OS to Windows Vista Ultimate. There was problem 
> with Precision Mapping 8, installed not running, some files missing. In 
> contact with Under Tow Software support, probably in few weeks should be 
> upgrade for Vista comps. So, I use PMap7 installed and run smoothly under 
> Vista. No problem at all with PMapServer707
> Another APRS issue, UI-View is running under Vista, problem is with new 
> help files format http://support.microsoft.com/kb/917607
> I've installed ALogger 3.0.0 and there is no problem at all. Even help 
> files are showing up. Great! The KISS option is very practical. Is 
> possible to add another option in ALogger for AGWPE connection. In such 
> case you can use one piece of TNC/radio/antenna for many programs. Also 
> you can connect to remote site.
> If you want to try connect to my APRS station in Poland, use AGWPE 
> connection to sr3wxa.no-ip.org port 8000
> Then you can log local true RF traffic.
> 73!
> Andy
>
>
>
>
> ----- Original Message ----- 
> From: "Bill Diaz" <william.diaz at comcast.net>
> To: "Aprssig" <aprssig at lists.tapr.org>
> Sent: Saturday, 10 February, 2007 13:23
> Subject: [aprssig] ALogger 3.0.0 released, KISS and remote client support
>
>
> ALogger 3.0.0 has been released.  This version includes support for KISS
> TNC's and the ability for remote clients to access an attached TNC or
> D7/D700 as well as logged packets from the APRS-IS.
>
> The remote client capability was designed primarily to permit remote 
> control
> of a PCSAT or similar Earth Station over the Internet and to monitor all
> radio/TNC traffic.
>
> Remote clients can connect to the ALogger session using a TelNet like
> connection (HyperTerminal etc) to receive all logged packets and
> communications to and from an attached serial device.  Write access to the
> attached serial device and APRS-IS is password protected, while other 
> users
> will have read only access.
>
> When used with a Virtual Serial Port (see
> http://www.hw-group.com/products/hw_vsp/index_en.html ) applications can
> obtain ALogger output, including Serial communications, via existing
> application serial port interfaces.  For example, it will now be possible
> for APRS-DOS to connect to an ALogger session via it's serial port and to
> access the Internet for communications via the APRS-IS.
>
> ALogger continues to provide the ability to log selected packets to disk 
> for
> later review, and to gate selected packets received over the serial port 
> to
> the APRS-IS.
>
> ALogger 3.0.0 can be downloaded from http://www.billdiaz.dynip.com
>
> Bill KC9XG
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
> 





More information about the aprssig mailing list