Order Tray | Contact Us | Home | SIG Lists

[aprssig] TM-D700A MANAULS ECTS

julien mervyn dedier julien9z4fz at gmail.com
Tue Jan 23 23:32:00 UTC 2007

 Since this is basic stuff i am sending some radios to you to programme ,i
hope you can do it if you hard knowledge on how to get the ham community to
use their tm-d700a and th-d7 ,for a a ham i expected better from you i want
to give you a challenge ,i am going to pull back and i want you to take over
and give us some direction on how to use our radio best.

All my email  will show that the evidence support the facts what i have been
talking about ,what about the ham driving his car and see CON on his console
but did not fully understand what was going on,all this about knowledge
exposing people

After visiting your site i taught i might learn some thing from what i see
you have limited mind ,packet virus,aprs packet virus exit ,in vk land you
say tnc crash not working ,well what cause the tnc to crash why the thc not
working ,please my friend if i am wrong please teach me i want to learn,
really i want to learn if i do not know something .

so i stand by and awaiting something from vk land  if i am a jerk well
packet virus is taboo ,please teach me what you know that i did not know

>   "aprs packet virus "
> Who is this jerk ?
> This is basic stuff.
> -----------------------------------------
> Andrew Rich
> Amateur radio callsign VK4TEC
> email: vk4tec at tech-software.net
> web: http://www.tech-software.net
> Brisbane AUSTRALIA
> -----Original Message-----
> *From:* julien mervyn dedier [mailto: julien9z4fz at gmail.com]
> *Sent:* Wednesday, 24 January 2007 6:16 AM
> *To:* TAPR APRS Mailing List
> *Subject:* [aprssig] TM-D700A MANAULS ECTS
> Hi to all on the forum thanks again for all the many emails ,for those of
> you who do not have the specialized manual here are the links to kenwood
> site for all that you need on the tm-d700a.
> In my next email we will go through the steps how to clean all the tnc
> with error showing up on aprs, i will show you every detail what to do
> before we start to set up the tnc,in fack the correct way is TNC PKT this is
> what you see on the console.
> All tnc of kenwood have to be reset in order to clean the tnc while the
> radio is working good from the console the tnc is not at it best because of
> aprs packet virus have it not at it best ,time and time again lot of us have
> been making mistake by using various in the terminal mode to reset all type
> of tnc especially tm-d700a this is wrong and not tne correct way in fact you
> are only putting the tnc closer to the edge in a build up of packet viruses.
> Yes i rest my tnc with APRS+SA,WINPACK,WINAPRS in terminal mode well the
> reset is waste of time no way this can be cleaned ,it will  not be  done in
> the correct way.
> OWENERS MANUAL PDF           ftp://inform.kenwoodusa.com/Manuals\TM-D700A.pdf
> <ftp://inform.kenwoodusa.com/Manuals%5CTM-D700A.pdf>
> SPECIALIZED MANUAL              ftp://inform.kenwoodusa.com/Manuals\TM-D700A%20Specialized.pdf
> <ftp://inform.kenwoodusa.com/Manuals%5CTM-D700A%20Specialized.pdf>
> INTERNAL CLOCK AND APRS TIME STAMP    ftp://inform.kenwoodusa.com/Resources\AMA_ApplicationNotes/AAN0027.pdf
> <ftp://inform.kenwoodusa.com/Resources%5CAMA_ApplicationNotes/AAN0027.pdf>
> MEMORY CONTROL SOFTWARE           ftp://inform.kenwoodusa.com/Resources\AMA_SoftwareRCPMCP/MCP-D700.ZIP
> <ftp://inform.kenwoodusa.com/Resources%5CAMA_SoftwareRCPMCP/MCP-D700.ZIP>
> --
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tapr.org/pipermail/aprssig/attachments/20070123/19a987bd/attachment.htm 

More information about the aprssig mailing list