Order Tray | Contact Us | Home | SIG Lists

[aprssig] New OpenTracker+ features

Andrew Rich vk4tec at people.net.au
Tue Jul 24 19:49:36 UTC 2007


Can I make a suggestion

One web page per device.

But list them or have a menu.

And then you you can go to buy one.

Clearance items are always attractive too



-----Original Message-----
From: aprssig-bounces at lists.tapr.org
[mailto:aprssig-bounces at lists.tapr.org]On Behalf Of Stan Leeds, KC7EHJ
Sent: Wednesday, 25 July 2007 5:34 AM
To: TAPR APRS Mailing List
Subject: Re: [aprssig] New OpenTracker+ features


What is the difference between an OT2 and an OT1+ besides packaging?

Thanks,
Stan/KC7EHJ

Scott Miller wrote:
> The changelog's been lagging behind since the introduction of the OT1+.
>  I'll be working on getting the website up to date soon, and that should
> help clarify things.  Right now, I've got the following active products:
>
> OT1m - OpenTracker 1 series in a metal enclosure.  Limited by
> availability of the MCU, soon to be discontinued.
>
> OT1+ - The current through-hole kit.  Includes all the features of the
> OT1 and adds RX capability, expanded telemetry features, and easier
> tuning and diagnostics.
>
> OT1+ SMT - Functionally the same as above, but in a 24-pin DIP form
> factor, like a Basic Stamp II.  Good APRS MIM replacement.
>
> T2-135 - A Tracker2 board that goes in the Alinco DR-135T.
> TNC/tracker/digi/wx, Garmin binary support, and so forth.  Currently in
> limited production until I get the kinks worked out of automated assembly.
>
> I also have a few OT1x kits left, or parts for them anyway, but I'm
> taking them off the website to reduce confusion.
>
> OT2m kits - the Tracker2 in the same metal case as the OT1m - are
> available from time to time as I get boards in and make up beta test
> kits.  Currently all of the betas are on rev C.  Rev D was the first SMT
> version and had too many errors to be useful.  Rev E is on the way now,
> and if it works out it'll be the first production version of a
> standalone T2.
>
> Scott
> N1VG
>
> Andrew Rich wrote:
>> Scott,
>>
>> I think the work you do is fantastic.
>>
>> I must admit I have trouble keeping up with what tracker is which. They
>> change so quickly.
>>
>> Do you maintain a hardware and software changelog ?
>>
>> I am trying to get the FLARM - glider tracking product to incorporate
>> GPWPL
>>
>> Andrew VK4TEC
>>
>> -----Original Message-----
>> From: aprssig-bounces at lists.tapr.org
>> [mailto:aprssig-bounces at lists.tapr.org]On Behalf Of Scott Miller
>> Sent: Monday, 23 July 2007 2:47 PM
>> To: TAPR APRS Mailing List
>> Subject: [aprssig] New OpenTracker+ features
>>
>>
>> I just posted a new OT1+ firmware version - this release covers the Peet
>>   Bros and Dallas/AAG weather stations and power control options, so the
>> OT1+ should be fully caught up with the OT1.
>>
>> I posted more details on the OpenTracker list, but aside from the
>> offline configuation editing function that I finally implemented after
>> three years of trying to find time, the most interesting thing is a new
>> addition to the SMT/telemetry firmware.
>>
>> The current version that's on the website now will turn on and off the
>> power control output pin (pin 9 on the radio connector or ADC6 on the
>> SMT board, 25 mA source / 48 mA sink) in response to an 'ON' or 'OFF'
>> APRS text message, and will ACK the message.
>>
>> Next up is access control and support for the other output pins, but
>> it's enough to test out anyway.  And it's not specific to the SMT
>> hardware - you can load the SMT firmware on the regular kit, but the
>> telemetry pin assignments are wrong.  The code will wind up in the
>> regular firmware as well, eventually.
>>
>> On a related subject, what's a good after market battery for the TH-D7A?
>>   Half an hour of sending messages to turn on and off an LED on my
>> workbench and this thing's ready for a recharge.
>>
>> Scott
>> N1VG
>>
>>


_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig

No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.476 / Virus Database: 269.10.14/912 - Release Date: 22/07/2007
7:02 PM

No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.476 / Virus Database: 269.10.14/912 - Release Date: 22/07/2007
7:02 PM





More information about the aprssig mailing list