Order Tray | Contact Us | Home | SIG Lists

[aprssig] KPC-3 case screws

'Scott Miller' scott at opentrac.org
Wed Jun 20 02:41:27 UTC 2007


On my KPC-3 (non-plus) they're black 3/16" #4-40 screws.  I happen to have a
couple hundred on hand (they're the same size as those on the Tracker2 and
OT1m), so if you want to save a trip to Home Depot you can PayPal a couple
bucks to me and I'll mail you a few.  Or if you happen to order anything
from my store at www.argentdata.com/catalog, just make a note of it in the
comments and I'll send some along with the order.

Speaking of the store, I'm placing a cable order tomorrow, so if anyone has
requests for speaker/mic cables let me know now.  I'm getting the standard
Icom/Yaesu, Kenwood, VX-170, and a couple of Motorola varieties so far.

Scott
N1VG

> -----Original Message-----
> From: aprssig-bounces at lists.tapr.org 
> [mailto:aprssig-bounces at lists.tapr.org] On Behalf Of Doug 
> Ferrell, KD4MOJ
> Sent: Tuesday, June 19, 2007 6:24 PM
> To: James Jefferson Jarvis; TAPR APRS Mailing List
> Subject: RE: [aprssig] KPC-3 case screws
> 
> James Jefferson Jarvis wrote:
> > They are #4-40. 3/8" long is probably fine. Your local 
> hardware store
> > or www.mcmaster.com.
> 
>   Thanks much. Don't know why I thought they were metric... 
> but I'll make a
> run to Home Depot.
> 
> ...DOUG
> KD4MOJ
> 
> 
> 
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
> 
> 







More information about the aprssig mailing list