[aprssig] Need Help Using APRS/CE with Kenwood D700
Allen Shuff allen_shuff at sbcglobal.netSun Jun 24 04:22:17 UTC 2007
- Previous message: [aprssig] Need Help Using APRS/CE with Kenwood D700
- Next message: [aprssig] Need Help Using APRS/CE with Kenwood D700
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Hello Stephen, Please see my response in your reply. -----Original Message----- From: aprssig-bounces at lists.tapr.org [mailto:aprssig-bounces at lists.tapr.org] On Behalf Of Stephen H. Smith Sent: Saturday, June 23, 2007 7:12 PM To: TAPR APRS Mailing List Subject: Re: [aprssig] Need Help Using APRS/CE with Kenwood D700 Allen Shuff wrote: > > I am trying to use APRS/CE with the following: Kenwood D700, Garmin > StreetPilot 1, and an IPAQ 4705. Here is my configuration: > > > > . The D700 is connected to the D700 serial port > using a Socket Cordless Serial Adapter (CSA).GPS input. > > . StreetPilot connected to D700. > > . D700 in TNC PKT mode. > > . Communication settings are: com1, 9600 baud > rate, 8 data bits, 1 stop bit (Note: TNC Type shows "None" and I can > not select anything else from the pull-down menu. > > . GPS setting is Data from TNC Automatically > > > > When using the D700 and CSA with APRS +SA, my position is reported > correctly on APRS +SA on my laptop; however, after attempting to send > my position, see a message similar to: > TNC>232036z0000.00N/0000.00W>000/000 followed by no digipeat of your > packet was heard. > > > This query as posted, makes no sense. o What does "The D700 is connected to the D700 serial port" mean??? >> This should have been "The IPAQ 4705 is connected to the D700 serial port" o What is a Socket Cordless Serial Adapter? Is it a bluetooth-type dongle? A serial-to-USB converter? or what? >> The Socket Cordless Serial Adapter is a Bluetooth to RS-232 adapter. o "(Note: TNC Type shows "None" and I can not select anything else from the pull-down menu." in what program or application? >> As stated above, the application is APRS/CE. I am using version 1.02. o Does the Street Pilot have a serial port? >> Yes, the StreetPilot 1 has an RS232 port. o Is it connected to the dedicated GPS port on the D700? >> Yes Thanks, Allen -- Stephen H. Smith wa8lmf (at) aol.com EchoLink Node: 14400 [Think bottom of the 2M band] Home Page: http://wa8lmf.com --OR-- http://wa8lmf.net NEW! World Digipeater Map http://wa8lmf.net/APRSmaps JavAPRS Filter Port 14580 Guide http://wa8lmf.net/aprs/JAVaprsFilters.htm "APRS 101" Explanation of APRS Path Selection & Digipeating http://wa8lmf.net/DigiPaths Updated "Rev H" APRS http://wa8lmf.net/aprs Symbols Set for UI-View, UIpoint and APRSplus: _______________________________________________ aprssig mailing list aprssig at lists.tapr.org https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
- Previous message: [aprssig] Need Help Using APRS/CE with Kenwood D700
- Next message: [aprssig] Need Help Using APRS/CE with Kenwood D700
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the aprssig mailing list
